Sharp Carousel R-4A38 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Микроволновая печь Sharp Carousel R-4A38. Sharp Carousel R-4A38 28 страниц.

Печатать страницу

Unpacking

and Examining

Your Oven

Remove:

1. afi packing materials from inside the oven cavity Read enclosures and SAVE the

Operation Manual.

2,. the feature sticker from the outside of the door, if there is one.

Check the oven for any damage, such as misaligned or bent door, damaged door

seals and sealing surfaces, broken or loose door hinges and tatches and dents inside

the cavity or on the door_ [f there is any damage, do not operate the oven and contact

your dealer or SHARP AUTHORIZED

SERVICER.

Choosing

a Location

for Your

Oven

You will use the oven frequently so plan its location for ease of use., It's wise, if possible, to have counter space on at least one

side of the oven. Allow at least 2 inches on the sides, top and at the rear of the oven for air c[rculation.

Do not place or install the oven in any area where heat and steam are generated; for example, next to or above a conventional

gas or electric range or above a conventional wall oven Heat and steam may damage the electronics or the mechanical parts

of the oven.

Built-In

Kit

Your oven can be built into a cabinet or walbnot near or above a heat source--using Sharp's Builbln Kit RK-42 for the R-4W38,

R-4A38i58/78;

the RK-42W for the R-4A48; the RK-81 for the R-5A38/58 and R-5W38 If your dealer does not stock the kit, it

can be ordered directly from the Sharp Accessories and Supplies Center Have your credit card number available and call toll-

free: 1-800-BE-SHARP

(t-800-237-4277)

for ordering the kit to be sent to your address,

The kit includes ducts and finish trim strips and easy-to-follow instructionsfor installation as well as the location of the power

supply.

This appliance must be grounded. This oven is equipped with a cord having a grounding wire with a grounding plug_ft must be

plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local

codes and ordinances. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape

wire for the eJectric current

WARNi NG

- improper use of the grounding plug can result in a risk of electric shock.

Electrical

Requirements

The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. or more protected

electrical supply_ It is recommended that a separate circuit serving only the oven be

provided..

The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall

receptacle that is properly installed and grounded. Should you only have a 2-prong

outlet, have a qualified electrician install a correct wall receptacle

A 3-prong adapter may be purchased

and used temporarily if tocai codes allow,

Follow package directions

A short power-supply cord is provided to reduce riskof becoming er_tangfed in or

tripping over a tonger cord.

Extension

Cord

if it is necessary to use an extension cord, use only a 3-wire extension cord that has

a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the

microwave oven, The marked rating of the extension cord should be AC 115-120 volt,

I5 amp or more.,

Be careful not to drape the cord over the countertop or table where it can be pulled

on by children or tripped over accidentally.

Note:

1.. If you have any questions about the grounding or electrical instructions, consult

a qualified electrician or service person.

Neither Sharp nor the dealer can accept any liability for damage to the oven or

personal injury resulting from failure to observe the correct electrical connection

procedures.

Radio

or TV Intelference

Should there be any interference caused by the microwave oven to your radio or TV,

check that the microwave oven is on a different electrical circuit, _'elocate the radio

or TV as far away from the oven as feasible or check position and signal of receiving

antenna

3*Prong Plug

Grounding Pin

3.Prong Receptacle

Ground

Receptacle Box

Permanent and Correct Installation

Ground

Grounding

Receplacie

Box

Adapter

Tab tot

Grounding Screw

Temporary Use