Sharp 40G100H Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для ЖК-ТЕЛЕВИЗОР Sharp 40G100H. Sharp 40G100H 24 страницы.

Печатать страницу

Preparation

Handling and precautions with the wall-mounted TV

• You can mount the TV on the wall using the optional bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on a wall only with a wall mount bracket recommended by SHARP. The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skills that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using a SHARP recommended bracket to mount the TV
• You can ask a qualifi ed service professional about using a SHARP recommended bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
NOTE
• If you want to mount the TV on the wall, use the screws provided with the wall-mount bracket to affi x the bracket to the rear of
the TV.

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC power cord from the AC power outlet.
• Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the 8 screws supplied with the stand.
1
Short screws (m4)
(used in step 3)
Attach the supporting post for the stand unit onto
2
the base as show below.
NOTE
• To detach the stand, perform the steps in reverse order.
• Angle adjustment is not available with the LC-40G100H.
40G100H_en.indd
40G100H_en.indd
5
5
Long screws (m4)
(used in step 2)
Long
Screw
screw
driver
1 Insert the stand into the openings on the
3
bottom of the TV.
2 Insert and tighten the 4 short screws into
the 4 holes on the rear of the stand.
2
1
Screw
driver
2
Short
screw
Soft
cushion
1
5
2009-12-17
2009-12-17
14:15:29
14:15:29