Sharp AQUOS LC-32BX6H Руководство по эксплуатации - Страница 37
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для ЖК-ТЕЛЕВИЗОР Sharp AQUOS LC-32BX6H. Sharp AQUOS LC-32BX6H 50 страниц. Lcd colour television
Печатать страницу
Useful adjustment settings
HDMI Setup
HDMI (High-Definition Multimedia Interface) terminal
selection.
1
To watch an HDMI equipment image, select
"INPUT4" or "INPUT5" using TV/VIDEO on
the remote control unit or on the TV.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press ENTER.
• The HDMI Setup can be selected only when
"INPUT4" or "INPUT5" is selected.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
DNR
Input Select
Blue Screen
Colour System
Power Control
HDMI Setup
PC Setup
5
Press a/b to select the desired item or
setting, and then press ENTER.
HDMI Setup
Selectable
items
items
Signal
RGB/
Type
YCbCr4:4:4/
YCbCr4:2:2
Colour
Auto/
Matrix
ITU601/
ITU709
Auto
Enable/
View
Disable
Audio
Digital/
Select
Analogue
NOTE
• Refer to your external equipment operation manual for
the signal type.
• When connecting a DVI-HDMI conversion adaptor/cable
to the HDMI terminals, the image may not come in clearly.
36
Description
Select the video signal type from
the HDMI terminal.
Select the video colour matrix type
when a YCbCr signal is input.
Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
Select "Digital" for audio signal via
the HDMI terminal. Select
"Analogue" for audio signal via the
AUDIO jack. (selectable only when
using INPUT4 of the two HDMI
terminals.)
PC Setup
Input Signal (PC input mode only)
• Some input signals may have to be registered manually
to display properly.
• The input signals (resolutions) in the list below are not
distinguishable when received. In such case, you have to
set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024g768
1280g768
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 3 input signals listed above.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "PC Setup" and then
press ENTER.
4
Press a/b to select "Input Signal", and then
press ENTER.
5
Press a/b to select the desired input signal
on the display.
1024 x 768
1280 x 768
1360 x 768
1360g768
(Example)