Sharp Aquos LC-32D44E Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для ЖК-ТЕЛЕВИЗОР Sharp Aquos LC-32D44E. Sharp Aquos LC-32D44E 40 страниц.

Quick guide

Setting the TV

Standard DIN45325 plug

(IEC 169-2)

75-ohm coaxial cable

Antenna

Connect the antenna cable from your antenna-

/cable socket or the (room-/roof) antenna for

antenna input terminal on the back of your TV set to

receive digitally/terrestrially broadcast stations.

An indoor antenna can also be used under good

reception conditions. Passive and active room

antennas are offered commercially. In an active

antenna its power is supplied via the antenna input

terminal.

The supply voltage (5V) must be correspondingly

set under "Supply Voltage". (See page 18.)

Bundling the cables

Bundle the cables

with the clamp.

Setting the TV on the wall

• This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 35.)

The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• The centre of the TV screen is 4 mm below "A" engraved onto the metal plate angle used for affixing to a wall.

• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.

Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting

or mounting that results in accident or injury.

• You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.

Cable clamp

Place the TV close

to the AC outlet, and

keep the power plug

within reach.

Product shape varies

in some countries.

AC cord