Crestron CAEN-UMP1X2-DIN-PWS Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стойки и подставки Crestron CAEN-UMP1X2-DIN-PWS. Crestron CAEN-UMP1X2-DIN-PWS 20 страниц. Caen automation enclosure mounting kit for 4-series automation processor and hub
Также для Crestron CAEN-UMP1X2-DIN-PWS: Начало работы (2 страниц)
Печатать страницу
To install the DIN-AP4:
1. Attach the DIN-AP4 to the DIN rail next to the DIN-HUB. Refer to the
guide
for details.
2. Use a small flat-head screwdriver to secure the end clamp next to the DIN-AP4. Tighten to
9 in.-lbs (1.02 nm).
3. Connect six of the terminal blocks included with the DIN-AP4 or save them for future use.
Refer to the diagram for placement.
Wire the DIN Rail Products
To connect the DIN products, use the following equipment included with the
CAEN-UMP1X2-DIN-PWS:
2-wire cable with flying leads on one end and a 2-pin terminal block on the other
l
4-wire cable with 4-pin connectors
l
Two tie wraps
l
Product Manual — Doc. 9310A
DIN-AP4 Quick Start
CAEN-UMP1X2-DIN-PWS • 11