DIGISYSTEM DSO-D Series Руководство по эксплуатации
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Лабораторное оборудование DIGISYSTEM DSO-D Series. DIGISYSTEM DSO-D Series 3 страницы. Hot air oven
Печатать страницу
INSTRUCTION MANUAL FOR HOT AIR OVEN DSO-D & DSO-DF SERIES
Warnings:
* Make sure that the door is closed well to prevent heat loss and power drain.
* The surface is hot. Do not touch.
* Do not put any objects on the top of the instrument.
* Please keep the environment ventilated.
1. Connect with power supply. Please make sure the power voltage is the same as the voltage shown on the
label stuck on the back of machine.
2. Put your sample in and close the door.
3. Press "ON/OFF Button", then you will see the "Power indicator' becomes green. Wait for about 5 seconds;
you can see that on the display screen, the top row is the present temperature value (PV) and the bottom
row is the setting temperature value (SV).
4. Set temperature: you will see
enter the value.
5. Set time: Select time mode: Continouos mode
5.1 Press
to set Continuous mode. OUT2 indicator on display screen will disappear. The
setting is finished. Go to Step 6.
5.2 Press
to set Timer mode. OUT2 indicator on screen will appear.
5.2.1 You will see
5.2.2 Use
to enter the value. Press
DIGISYSTEM LABORATORY INSTRUMENTS INC.
or
.
or
key to select time unit
to next setting.
Air vent
. Press
or
to adjust SV value and then press
or Timer mode
(hour) or
www.digisystemlab.com
Controller
.
(minute). Press
to
REV.1-2017