Sharp LC13-B2E Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для ТЕЛЕВИЗОР Sharp LC13-B2E. Sharp LC13-B2E 46 страниц. Lcd color television

ADJUSTING PROCEDURE OF EACH SECTION

[1] Entering the MAIN side adjustment process mode

There are three methods below.

1) Press the "Adjustment process key" on the remote control after turning on the power.

2) Pressing both the MENU key and the TV/VIDEO key on the main body, turn on the power. Then, press the

volume DOWN key and the tuning DOWN key at the same time.

3) Turn on the power with falling either KEY4 (pin (81) of microprocessor) or KEY5 (pin (82) of microprocessor) to "L".

[Note] For the method 3), the ROM is initialized at the same time. Therefore, 3) must be executed, if IC2004 or

IC2001 is changed. For 1) or 2), the main body only enters the MAIN side adjustment process.

[2] Entering the TUNER side adjustment process mode

4) Entering the TUNER side adjustment process

MENU key on the main body → Cursor UP key (remote control) → Select the position shown in the figure below

and press the M key (remote control) within 1 second. → Enters the adjustment process.

[3] Adjustment

MAIN side adjustment (Press the "M" key to move the cursor and press the volume UP/DOWN key to make an

adjustment.)

• Power supply voltage adjustment (+B 5V)

• Model setting

• Inch size setting

• COMMON BIAS adjustment of LCD module

• CUTOFF adjustment

TUNER side adjustment (Press the tuning UP/DOWN key to move the cursor and press the volume UP/DOWN

key to make an adjustment.)

• Horizontal size adjustment (LCD adjustments)

• Video adjustment (other adjustments)

Y delay

Subcontrast

Subcolour

Subbrightness

Tint offset

AGC gain start

The TUNER side adjustment is possible. However, it is recommended to replace EAROM (I2).

Direct control at TV

Black level

Contrast

Colour

M: Back

: select

E: End

LC-13B2E