Sharp CD-80W Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Sharp CD-80W. Sharp CD-80W 28 страниц.
Печатать страницу(Continued)
Example: When installed on the wall
Example: When installed vertically
3.2 mm (1/8")
5 mm (3/16")
Min. 22 mm (7/8")
1
Wall mounting screw
Wall surface
Min. 17 mm (11/16")
2
Wall surface
(Front speakers only)
Wall
60 - 90 cm
(23" - 35")
9 mm (3/8")
5 mm (3/16")
Installation of the surround speakers:
If possible, mount the surround speakers on the wall. lnstall them
60 - 90 cm (23" - 35") above the height of your ears when you
are seated, if possible.
To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on
the wall.
Be sure to use the type and size of screw that is shown to the
left.
1
Drive one screw into the wall for each speaker as shown in
the illustration.
Make sure that both the screw and the wall can support a load
of 20 kg (45 lbs.).
Drive the screws, so there is about a 5 mm (3/16") space
between the wall and the head of the screw.
2
Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.
Note:
When the surround speakers are installed vertically, the speaker
badge will be upside down.
In this case, you can adjust the badge to face the proper direc-
tion. Just turn it by hand.
Badge
Removing the speaker grilles
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
Only the grills on the upper woofers are removable.
Caution:
When the speaker grilles are removed, the speaker diaphragms
are exposed. Make sure nothing comes into contact with the
speaker diaphragms.
Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes
and push them lightly with the palm of your hand to secure.
E-7