Sharp MX-2300N Guide Руководство по технике безопасности - Страница 6

Просмотреть онлайн или скачать pdf Руководство по технике безопасности для Принтер "все в одном Sharp MX-2300N Guide. Sharp MX-2300N Guide 28 страниц. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Также для Sharp MX-2300N Guide: Технические характеристики (2 страниц), Руководство по устранению неполадок (44 страниц), Руководство по заполнению документов (47 страниц), Инструкции по сканированию в электронную почту (7 страниц), Руководство по настройке программного обеспечения (48 страниц)

INSTALLATION REQUIREMENTS

Improper installation may damage this product. Please note the following during initial installation and whenever the

machine is moved.

1. The machine should be installed near an accessible

power outlet for easy connection.

2. Be sure to connect the power cord only to a power

outlet that meets the specified voltage and current

requirements. Also make certain the outlet is properly

grounded.

• For the power supply requirements, see the name

plate at the bottom of the back of the left side of the

machine.

Connect the machine to a power outlet which is not

used for other electric appliances. If a lighting fixture is

connected to the same outlet, the light may flicker.

3. Do not install the machine in areas that are:

• damp, humid, or very dusty

• exposed to direct sunlight

• poorly ventilated

• subject to extreme temperature or humidity

changes, e.g., near an air conditioner or heater.

4. Be sure to allow the required space around the

machine for servicing and proper ventilation.

5. When moving the machine, four persons must firmly

grasp the transport handles on both sides of the

machine.

6. The machine includes a built-in hard drive. Do not

subject the machine to shock or vibration. In

particular, never move the machine while the power is

on.

A small amount of ozone is produced within the printer during operation. The emission level is insufficient to cause any health

hazard.

NOTE:

The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m

concentration.

However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier in a ventilated

area.

30 cm

(11-13/16")

30 cm

(11-13/16")

) calculated as an 8 hr. time-weighted average

45 cm

(17-23/32")