Digit Z DZ4-600 Руководство

Просмотреть онлайн или скачать pdf Руководство для Весы Digit Z DZ4-600. Digit Z DZ4-600 2 страницы. Digital pocket scale

I. Operation

1. Place the scale on a flat, level surface and press the

ON/OFF key to turn the scale on.

2. Once the start-up process completes and the scale

goes to zero you are ready to weigh.

3. Place the quantity to be weighed onto the weighing

platform.

4. Wait a couple seconds for the display to stabilize

before taking a weight reading.

II. Changing the Unit of Measure

1. Press the MODE key to change the scales displayed

unit of measure.

2. If the scale is turned off then back on, it will default

to the last unit used.

• DZ4-600 Units: g (gram) oz (ounce) ozt (troy

ounce) dwt (pennyweight)

III. Using the Tare Feature

You can use this scale's tare feature to subtract the weight

of an empty container or vessel for net weight determination.

NOTE: The weight of the container will subtract from the

available capacity.

1. Place the empty container or vessel on the weighing

platform.

2. Press the TARE key once. The display will then

reset to zero. If the container is removed, it's weight

will be displayed as a negative number.

3. You may now fill the container with the quantity to

be weighed. The display will show the net weight of

the contents.

4. To return to normal weight display (gross weight),

remove any items from the weighing platform and

press the TARE key again to re-zero the scale.

DZ4-600 Manual