Digitag Bluetooth Digital Scale Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы Digitag Bluetooth Digital Scale. Digitag Bluetooth Digital Scale 14 страниц. Barkeepapp

Печатать страницу

Getting Started

The Digitag Scale

Status Lights

There are four status lights on the front of your Digital Scale.

Power Light

•

symbol of a power cord. This light is on when the scale is plugged into a power source.

Bluetooth Light

•

first of these is a blue light located directly above a Bluetooth symbol. This blue light is on when your

scale is communicating with another device.

On/Off Light

•

press the on/off switch. It is the only button on the front of the scale.

Battery Light

•

recharged.

Turning Your Scale On

To turn your scale on:

1. Press the power switch located between the three status lights and the Serial Number label.

2. If the green On/Off Light does not come on, please try recharging the scale's battery.

3. If the battery does not charge, please see below regarding connecting the rechargeable battery.

Connecting the Rechargeable Battery

We will typically connect the scale's rechargeable battery before shipping it to you. However, occasionally

customers may receive a scale with the rechargeable battery disconnected. If you can't seem to turn on or

charge your scale, the battery may have become disconnected.

If you believe that your scale's battery is not connected, you should remove the scale's top metal case. The

components of the scale fit snugly into the top metal case, however it is possible to remove the scale from the

metal case. You simply have to grasp the "legs" on the scale and pull firmly on the upper case until the scale

components slide out of the metal case. There are two wires that connect the scale to the rechargeable

battery. Make certain that both wires are firmly connected to the rechargeable battery and replace the metal

cover on the scale.

Note: Be very careful when replacing the metal cover to make sure that the power switch is lined up with

the slot on the front of the metal cover. If you try to put the metal cover on and the power switch is

misaligned, you can break the power switch off and have to use the tip of a pen to turn the scale on and off in

the future.

- Just to the right of the Power input plug is a red light located directly above the

- There are three lights grouped together just to the left of the on/off switch. The

- The middle green light is on when your scale is powered on. To turn the scale on/off

- The rightmost red light is on when the scale is low on battery and needs to be