Sharp SJ-XP620PG Руководство по эксплуатации - Страница 30

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Холодильник Sharp SJ-XP620PG. Sharp SJ-XP620PG 32 страницы.

Problem

The control panel does not work.

(Only for SJ-XP570PG,

SJ-XP620PG, SJ-XP660PG)

Some lines are on the surface of

the plastic parts.

Door alarm does not stop.

(Only for SJ-XP570EM,

SJ-XP620EM, SJ-XP660EM)

If you still require service

Refer to your nearest service agent approved by SHARP.

This may occur in one of the following cases.

• The panel or your finger is soiled with dripping, oil and etc.

• When you touch the panel with gloved hand, adhesive bandage on your

finger,nail or objects.

• Sticker or tape is affixed on the keys.

• Touch position is slightly off from the keys.

• Operate time is not enough for the keys to work.

• These are not defects during production.

The meeting part of the resin material or

the junction part of the metallic mold are

remained like lines.

If the door alarm does not stop after closing all doors, it is a defect. Contact

the SHARP service center for service.

Method of stopping the door alarm temporarily

Press "R" button and "F" button simultaneously

and continuously for 3 seconds or more.

• The door alarm will sound again after

approximately 2 days.

Solution

Line

Beep beep beep