Sharp Conference Series XG-PH80W-N Руководство по настройке - Страница 30

Просмотреть онлайн или скачать pdf Руководство по настройке для Проектор Sharp Conference Series XG-PH80W-N. Sharp Conference Series XG-PH80W-N 32 страницы. Projectors
Также для Sharp Conference Series XG-PH80W-N: Брошюра и технические характеристики (4 страниц), Технический паспорт (4 страниц), Технические характеристики (2 страниц)

Troubleshooting

Check if the "TCP/IP" protocol is operating correctly using the "PING" command. Also, check

if an IP address is set.

1. Open a command prompt.

2. After launching the command prompt enter a command "PING".

3. When connecting normally, the display will be as follows.

4. When a command cannot be sent, "Request time out" will be displayed.

5. To return to the Windows

When the projector cannot be connected, even though the "PING" command is checked:

•

-30

•

In the case of Windows

"Command Prompt" in order.

•

In the case of Windows

"Accessories" ➔ "Command Prompt" in order.

Entry example C:\>ping XXX.XXX.XXX.XXX

"XXX.XXX.XXX.XXX" should be entered with an IP address to be connected to, such as the

projector.

(The screen may be slightly different depending on the OS type.)

<Example> when the IP address connected to is "192.168.150.1"

Check the network setting again.

If communication can still not be established properly, contact your network administrator.

When a security software is installed on the PC, or when a ﬁ re wall has been set up for the

network system, connection may not be possible. Consult the system administrator.

2000: click "start" ➔ "Programs" ➔ "Accessories" ➔

: click "start" ➔ "All Programs" ➔

XP, Windows Vista

screen, enter "exit" and then press the "Enter" key.