Sharp Notevision XG-C465X-L Руководство по настройке - Страница 19

Просмотреть онлайн или скачать pdf Руководство по настройке для Проектор Sharp Notevision XG-C465X-L. Sharp Notevision XG-C465X-L 46 страниц. 3-lcd conference / classroom data-video projectors
Также для Sharp Notevision XG-C465X-L: Технический паспорт (2 страниц)

Печатать страницу

1. Connecting the Pro-

jector to a Computer

Establishing a one-to-one connection from the

projector to a computer. Using a commercially

available LAN cable (UTP cable, Category 5,

cross-over type) you can configure the pro-

jector via the computer.

Disconnect the computer's LAN

cable from the existing network.

Connect a commercially avail-

able LAN cable (UTP cable, Cat-

egory 5, cross-over type) to the

projector's LAN terminal and

connect the other end of the

cable to the computer's LAN

terminal.

Plug the power cord into the AC

socket of the projector.

Turn on the computer.

Info

Confirm that the LINK LED on the rear of the

projector illuminates. If the LINK LED does not

illuminate, check the following :

• The LAN cable is properly connected.

• The power switches of both the projector

and the computer are on.

This completes the connection. Now proceed to "2. Setting an IP Address for the Com-

puter".

Setting up the Projector Network Environment

A LAN cable being

connected to the network

(cross-over type, commercially available)

LAN cable

-19