Crestron 3 Series Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Контроллер Crestron 3 Series. Crestron 3 Series 6 страниц. Automated processors
Также для Crestron 3 Series: Краткое руководство по эксплуатации (2 страниц), Быстрый старт (2 страниц), Из руководства (2 страниц), Из руководства (2 страниц), Краткое руководство (2 страниц), Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (8 страниц), Руководство по эксплуатации (20 страниц)

Печатать страницу
Crestron 3 Series Краткое руководство по эксплуатации
RMC3
3-Series® Room Media Controller
The Crestron®
RMC3
is a compact, cost-effective 3-Series® control
system designed to provide control and monitoring for a single display
device, a small AV system, lighting and shading, climate control, security,
energy management, and many other specialized applications. Its small
form factor allows it to be placed just about anywhere with the option to
attach it to a flat surface or DIN rail.
In the Box
1
RMC3, 3-Series® Media Room Controller
Additional Items
1
Bracket, Mounting, Integrated DIN Rail Clip (4510935)
2
Screw, 6-32, 3/8 in., Phillips (2007225)
1
Adapter, USB to USB Mini (2037338)
2
Connector, 3-Pin (2003575)
2
Connector, 4-Pin (2003576)
1
Connector, 5-Pin (2003577)
Mount the Device
The RMC3 can be mounted onto a flat surface or a standard DIN rail
using the included mounting bracket.
CAUTION: To prevent overheating, do not operate the RMC3 in an area
that exceeds the environmental temperature range (32 to 104 °F or
0 to 40 °C) for this device.
Optional rack mount and pole mount kits (not included) are also available
for use with the extender. For more information, refer to the RMK-IFE-1U
Installation Guide (Doc. 7627) and the PLMK-IFE-101 Installation Guide 
(Doc. 7615) at www.crestron.com/manuals.
Surface Mounting
1. Detach the RMC3 from the mounting bracket by pulling the left and
right flanges of the bracket outward to release the tabs that hold the
RMC3 in place.
2. Attach the mounting bracket to the surface by using four appropriate
mounting screws (not included) through the four mounting holes on
the bottom of the bracket.
3. Align the slots on the bottom of the RMC3 with the tabs on the
mounting bracket.
4. Press the RMC3 into the bracket until it snaps into place.
Quick Start
1