Shimano deore XT Инструкция по техническому обслуживанию - Страница 6
Просмотреть онлайн или скачать pdf Инструкция по техническому обслуживанию для Аксессуары для велосипедов Shimano deore XT. Shimano deore XT 9 страниц. Front derailleur for triple
Также для Shimano deore XT: Руководство по эксплуатации (2 страниц)
Печатать страницу
5.
With the brake lever depressed, open and close the bleed
nipple in rapid succession (for approximately 0.5 seconds each
time) to release any air bubbles which may be in the calipers.
Repeat this procedure about 2 to 3 times.
Then tighten the bleed nipple again.
6.
Fill the reservoir tank with oil and then replace the reservoir tank cover. Fill the reservoir tank to
overflowing with oil while replacing the cover to ensure that no air bubbles remain inside the
reservoir tank. In addition, be careful not to get any oil on parts such as the rotor and brake pads.
7.
Return the brake lever to its original position.
Note:
Do not use brake fluid fillers, as they can cause small bubbles of air to form, and such
bubbles can cause severe drops in braking performance.
I Installation of the calipers (BR-M765) and securing the hose
• Remove the pad spacer
A (yellow), and then set the wheel which has the rotor onto the frame.
F
• Install the brake pads.
Pad spacer
F
A (yellow)
Tightening torque:
0.3 - 0.5 N·m {2.7 - 4.4 in. lbs.}
Bleed nipple
Tightening torque:
4 - 6 N·m {35 - 53 in. lbs.}
Brake pads