Shimano ST-RS203 Руководство дилера - Страница 5

Просмотреть онлайн или скачать pdf Руководство дилера для Аксессуары для велосипедов Shimano ST-RS203. Shimano ST-RS203 48 страниц. Shifting lever

Печатать страницу

TO ENSURE SAFETY

• Be sure to follow the instructions provided in the manuals when installing the product.

It is recommended to use genuine Shimano parts only. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall over,

which may cause serious injury.

In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious injury.

•

Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts.

• After reading the dealer's manual thoroughly, keep it in a safe place for later reference.

Be sure to also inform users of the following:

• Each bicycle may handle slightly differently depending on the model. Therefore, be sure to learn the proper braking technique (including brake lever

pressure and bicycle control characteristics) and operation of your bicycle. Improper use of your bicycle's brake system may result in a loss of control or

a fall, which could lead to severe injury. For proper operation, consult a professional bicycle dealer or the bicycle's owner's manual. It is also important

to practice riding and braking, etc.

• If the front brake is applied too strongly, the wheel may lock and the bicycle may fall forward, and serious injury may result.

• Always make sure that the front and rear brakes are working correctly before riding the bicycle.

• The required braking distance will be longer during wet weather. Reduce your speed and apply the brakes early and gently.

• If the road surface is wet, the tires will skid more easily. If the tires skid, you may fall off the bicycle; therefore, to avoid this, reduce your speed and

apply the brakes early and gently.

• Because of the characteristics of the carbon fiber material, the lever should never be altered. Otherwise, the lever may break preventing braking

operation.

• Check before riding that there is no damage such as carbon peeling or cracking. If there is any damage, stop using the bicycle and consult a dealer or

an agency. Otherwise, the lever may break preventing braking operation.

Be sure to also inform users of the following:

• In the case of carbon levers, wash them with a soft cloth using a neutral detergent. Otherwise, the material may break down and be damaged.

• Avoid leaving the carbon levers in areas of high temperature. Also keep them well away from fire.

• Be sure to keep turning the crank during gear shifting.

• Be sure to keep turning the crank during the shifting lever operation.

• If gear shifting operations do not feel smooth, wash the derailleur and lubricate all moving parts.

• Products are not guaranteed against natural wear and deterioration from normal use and aging.

• For maximum performance we highly recommend Shimano lubricants and maintenance products.

For Installation to the Bicycle, and Maintenance:

• Using a frame with internal cable routing is strongly discouraged as it has tendencies to impair the SIS shifting function due to its high cable resistance.

• Use an outer casing which still has some length to spare even when the handlebars are turned all the way to both sides. Furthermore, check that the

shifting lever does not touch the bicycle frame when the handlebars are turned all the way.

• Use an outer casing [OT-SP41] and a cable guide (SM-SP17/SP18) for smooth operation.

WARNING

NOTE