Shimano ALFINE SG-S7001-11 Руководство дилера - Страница 35

Просмотреть онлайн или скачать pdf Руководство дилера для Велосипед Shimano ALFINE SG-S7001-11. Shimano ALFINE SG-S7001-11 48 страниц.

Adjustment

Adjustment

Adjusting the cassette joint

Operate the shift lever and set to the specified gear position.

SG-S7001 (internal 11-speed): 11-speed to 6-speed

SG-S7001 (internal 8-speed): 8-speed to 4-speed

SG-C6001 / SG-C6011 (internal 8-speed): 1-speed to 4-speed

SG-C7000 / SG-C7002 (internal 5-speed): 5-speed to 3-speed

Turn the cable adjustment barrel and align the setting lines.

Check that the yellow setting lines on the cassette joint bracket and pulley are aligned with each other. The

yellow setting lines on the cassette joint are located in two places.

When the bicycle is upright

Pulley

Bracket

Should be aligned

If the area of the pulley and bracket marked by the setting line overlap by two thirds or less, the

gears may not be properly engaged during pedaling, resulting in abnormal noise or free spinning

of the pedals.

Operate the shift lever and recheck that the yellow setting lines are aligned.

Operate the shift lever again from step

When the bicycle is upside

down

Pulley

Bracket

Should be aligned

to check.