Accutone WT99 Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Гарнитуры Accutone WT99. Accutone WT99 10 страниц. Dect headset system for telephones with handset lifter

Печатать страницу

WT99 WIRELESS TELEPHONE HEADSET

your true wireless handsfree office solution!

Installation

C. Setting up Handset Lifter

Lift up the handset and carefully

remove the sticker seals and place the

lifter on top of the speaker area (as

shown below) of the telephone under

the handset.

Not all telephones have a large flat

surface or the speaker area may not be

directly below the handset.

If so, just find any way to fix the lifter

underneath the handset, and follow

the instructions about using an

external sensor in section E.

First of all, connect the Lifter Plug

(W)

into the Handset Lifter Jack

located on the back of the base

station.

Flip over your handset lifter, and you

will find two stickers, one vertical and

one horizontal.

D. Adjusting Handset Lifter

Now test the lifter by wearing the headset and pressing the answer button

(16)

on the headset, if there's no response or the headset hasn't been charged,

please refer to the next section and come back to here afterwards.

If the handset lifts up and you can hear a dial tone, your lifter setup is

completed. But if lifter lifts up the handset but not enough for picking up the

line signal, you will need to adjust the lifting height as below:

But if even the highest setting is not

enough to lift the handset for picking a

line, try adding pads between lifter and

the telephone as shown below to

shorten the lift-distance.

The LED Indicator

you press the Answer Button

your headset, indicating online status.

[ inspiring people, inspiring change ]

Locate the

(S)

Lifting Height Switch on the

front side of the lifter as illustrated. There

are 3 selection you can choose with the

top-most being the highest lifting distance.

As the weight and size of handsets vary

across telephones, you may need to use a

lower setting if the handset flies out of its

cradle due to its lightweight.

(T)

lights up when

(2)

Installation

Rubber or Paper Pads.