Digital Concepts PORTABLE LIGHT STUDIO PS-101 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для фотоаппаратов Digital Concepts PORTABLE LIGHT STUDIO PS-101. Digital Concepts PORTABLE LIGHT STUDIO PS-101 4 страницы. Portable light studio

Печатать страницу



DO NOT touch any part of the video light housing or safety glass if the light has recently

been in use. Wait until the light has been cooled.



DO NOT touch the light bulbs with your bare fingers. Oil from your skin can cause the

bulbs to burnout. Use cloth or plastic between the bulb and your fingers when inserting

and removing bulbs.

The Portable Lighting Studio comes with GU10-C light bulbs. These bulbs can be purchased at

many hardware or lighting stores.

To change bulbs follow the steps below:

1. Detach the front cover from its housing by unscrewing it in a counter-clockwise motion

and then pulling it off.

2. Remove the old bulb and insert the fresh bulb into the lamp's socket, matching pins to

socket holes.

3. Replace the front cover by screwing it on using a clockwise motion.

In order to get the best results when using the included lamps, please follow the below steps:

Pull out the lamp's retractable legs, they will automatically spread out so that they can be

used to support the lamp.

2. Place the lamp on a solid, stable surface and proceed to adjust the angle of the lamp's

head.

Insert the lamp's plug into an available AC outlet. A 110 volt outlet is required in order to

use your lamps safely.

4. To turn on your lamp, rotate the on/off switch on the lamp's wire.

The light box that is included with your package comes folded in its portable carrying case. In

order to assemble the light box and begin using your portable lighting studio, please follow the

steps below:

1. Open the Velcro latch on the portable carrying case, and now open the carrying case.

The unit has three semi-opaque, fiber-mesh square pieces. Two of these, which are

attached to the unit's carrying case, will form the left and right walls of your lighting

studio. The third, which is not connected to your unit, can be Velcroed to the top to form a

roof for your studio.

3. The dual sided background can be unrolled to provide contrast when taking photos of

light or dark objects.

CHANGING BULBS

OPERATING THE LAMPS

OPERATING THE LIGHT BOX