DIGITAL DELAY Mega 300 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильные аксессуары DIGITAL DELAY Mega 300. DIGITAL DELAY Mega 300 14 страниц.

Печатать страницу

To set a new Dial-In time into either Your Time or Their Time press the C key until the A and B letters are shown

Dial-Ins (C1). To enter a new number press the corresponding letter key (A or B) for the Dial-In time to be changed. The

selected display row will go blank indicating the unit is ready to accept the new Dial-In time. Enter the new Dial-In time using

the numerical keys, leading zeros do not have to be entered. For example if 9.90 for a Dial-In time is desired 990 would be

entered on the keypad.

entered into memory. If a mistake is made while entering the number, depressing the corresponding letter key (A or B) again

will erase the last digit entered. This can be repeated as many times as necessary until the display is blank.

To set a new Delay time into either Delay 1 or 2, repeatedly press the C key until the letters A and B are shown next

to the Delays (C2). Then follow the same procedure for entering a new number as instructed in setting new Dial-In times.

Setting and Displaying the Delay

Tap Up/Down (Sub-Add) Information

To display the Tap Up/Down information, repeatedly press the D key until the letters A and B are shown next to the

Sub/Add and How Late (D1). The Sub/Add information is shown to the right of the letter A. The left most digit shows the

number of times the Tap Up/Down push-button was pressed. The two right hand digits show the programmable time (0 to 9

hundredths of a second) to be subtracted from or added to the delay time every time the Tap Up/Down push-button is pressed.

Above the two right digits the word Sub or Add will be shown, this indicates what will happen when the Tap Up/Down push-

button is pressed (Add = Tap up and Sub = Tap Down). To change the number, press the A key and enter the new number (0-

9). To switch between the Sub and Add modes press the A key repeatedly, once the far right digit is blank the unit will toggle

between the Sub and Add modes each time the A key is pressed. Once the mode is selected enter the new Sub/Add amount.

The Tap Up/Down will only affect the first delay time started.

To display the How Late information, repeatedly press the D key until the letters A and B are shown next to the

Sub/Add and How Late (D1). The How Late information is shown to the right of the letter B. If the Transbrake is released on

Delay-2 (4-Digit) the left most digit will display an "2", if not, it will be a "1". The remaining digits display the How Late

time. For example if the number displayed is "2.012" and your reaction time was .510 on the time slip, add the How Late time

to the .510 for a total reaction time of .522 on the crossover delay.

NOTE:

Both How Late and Tap Up/Down information are stored in memory until either a new How

Late or Tap Up/Down number replaces the old one or the B key is pressed while the Tap

Up/Down and How Late information is displayed, they will then both be cleared to all zeros.

Setting Dial-In Times

As the numbers are entered they are shown on the display, indicating the numbers are accepted and

Setting Delay Times

Understanding the How Late

next to the