Digital Electronics Corporation APL3700-TA Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Промышленный компьютер Digital Electronics Corporation APL3700-TA. Digital Electronics Corporation APL3700-TA 17 страниц.

Печатать страницу
1.
Internal switches of the control box
Bottom face of the control box
Switch
Switch Name
Location
SW1 System Set SW
Serial Mode
SW2
Select SW
CI(RI)/+5V
SW3
Changeover SW
CI(RI)/+5V
SW4
Changeover SW
System Set Switch
Switch
Description
No.
1
Internal setting
Implements the
logical inversion
2
operation for RAS
output.
Sets up an enabled/
disabled state for the
3
front USB port execution
control function.
4
5 to 8
Internal setting
9 to 10
*1
The Setting up an enabled/Disabled state for USB port execution control function is
available for only Windows® 2000 and Windows® XP. Make sure to disable the
function of the setting when other OS is used.
Compatible
I/F
See
–
Set Switch
All OFF
COM1
(RS-232C)
COM2
CI(RI)
COM1
CI(RI)
ON
Reserved Reserved OFF
Normal
Close
Enabled Disabled ON
*1
Reserved Reserved
SW1
SW2
Factory
Settings
10-point dip switch. For System Set
System
SW and the factory settings details,
see
System Set Switch.
10-point dip switch. Designates COM1
communication settings. For Serial
Mode Select SW details, see
Mode Select Switch.
Changes # 9 pin (CI(RI) <---> +5V).
Changes # 9 pin (CI(RI) <---> +5V).
Factory
OFF
Settings
Normal
OFF
Open
OFF
ON
OFF
6
SW3
SW4
(CI)RI
5V
Description
Notes
Do not change.
(Factory setting)
RAS output is a CLOSE state when
the SW and the system is ON. When
the SW is OFF, it is the opposite. The
RAS Output keeps Normal OPEN
when the Soft OFF state occurs or the
power turns OFF.
The front USB port is available
when the SW is ON. It is
unavailable when the SW is OFF.
Do not change.
(Factory setting)
Serial