Bitspower Touchaqua TA-DIO14-RGB Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Компьютерное оборудование Bitspower Touchaqua TA-DIO14-RGB. Bitspower Touchaqua TA-DIO14-RGB 15 страниц.

Печатать страницу

Install the water tank flap

Silver/M2 screws

Need translation

Install the fans and reservoir on the radiator

End result

The flap must be installed

in the same direction as

shown in the image.

Opposite installation will

result in malfunction.

Need translation

Black/M3 Screw

P 6

If the pump cap has to be installed back to the pump, please note that there is a

protruding part at the bottom of cap. The protruding part needs to be put into the

side of the pump as shown. Do not turn the cap and the pump after installation.

SC6 Pump Spec.

Power/Voltage：12V DC

DC power：≤12W

Electric connector：Molex 4 Pin

Maximum revolution：5200±5％RPm

Noise：≤40 dBA/m

Remark:

The SC6 pump features speed control

PWM. If powered directly from the power

supply, it will operate at full speed. The

function of speed control PWM can only

be managed by the motherboard's

software if connected to the mother-

board fan header.

Need translation

Black/M3 Nut

A B

C D

A Negative electrode -

B Positive electrode +

C Speed message FG

D Speed control PWM

Black/M3 Screw

(Fixed to case)

Plastic washer