Bittium HSAT Краткое руководство - Страница 3

Просмотреть онлайн или скачать pdf Краткое руководство для Медицинское оборудование Bittium HSAT. Bittium HSAT 4 страницы. Recording with 2 rip belts

Печатать страницу

During a recording

Stopping a recording

3 sec.

If your recording is set to

end automatically, skip

the step 1.

3 sec.

The LEDs are lit in green

to indicate a successful

recording start.

The LEDs will turn off

automatically after 30

seconds if everything is

OK and you are lying

down.

You can shortly press the power button to mark times when you are not sleeping,

such as going to bed, going to the bathroom, waking up... (Optional)

Press the power button

for about 3 seconds until

the device vibrates 3

times and the LED

indicators are lit in blue

one by one from left to

right.

Pulse oximeter turns off

automatically when you

remove the sensor from

your ﬁnger.

The LED indicators are

lit in blue for 5 minutes

but you can move to the

next step.

Press the power button

for about 3 seconds

until the LED indicators

are lit in blue.

Continue to the next

step.

If your recording is set to

start automatically, skip

the steps 12 and 13.

8 sec.

Press the power button

again for about 8 seconds

until the device vibrates and

the LEDs start blinking blue.

If any LED indicator blinks

red or yellow, check that the

item corresponding to the

indicator is connected

properly. Explanations for

the indicators can be found

on the next page.

Detach the equipment from

yourself. Place all the items

back into the carry case

and return it to the clinic.

3 (4)