Siemens SIMATIC RTLS Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование Siemens SIMATIC RTLS. Siemens SIMATIC RTLS 30 страниц. Localization systems
Также для Siemens SIMATIC RTLS: Руководство по эксплуатации (21 страниц), Руководство по эксплуатации устройства (14 страниц), Руководство по эксплуатации (20 страниц), Руководство по эксплуатации (21 страниц)

Mixed operation of the transponders/gateways of the RTLS4000 product family and

transponders of the RTLS5000 product family

The SIMATIC RTLS5201T transponder is compatible with the transponders and gateways of the

RTLS4000 product family. Unlike the transponders of the RTLS4000 product family, it exclusively

uses the UWB channel 5 for localization and communication. Therefore, the configurations must

be adapted both for an existing RTLS system and for a newly commissioned system. Below is a

more detailed description of these two applications and an explanation of what you must

configure in the Locating Manager in order for the mixed operation of the two product families

to function properly.

Initial situation

•

Locating Manager V2.13.0.3 or higher

•

Gateways with Timesync on UWB channel 5 and localiza‐

tion on UWB channel 2 (blinks)

•

Transponders with blinks on UWB channel 2

•

Any PHASE channels

Preamble length = 256

PRF = UWB channel 2: PRF16, UWB channel 5: PRF 64

SIMATIC RTLS5201T

Operating Instructions, 08/2023, C79000-G8976-C687-02

Target situation

•

Gateways with Timesync on UWB channel 2 and localiza‐

tion on UWB channel 5 (blinks)

•

Transponders with blinks on UWB channel 5

Preamble length = 256

PRF = No reconfiguration of the PRF is necessary if the "Blink"

function and time synchronization of the radio interface are

swapped.

Installation and operation

3.2 Operation