Siemens SIMATIC S7-200 Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Промышленное оборудование Siemens SIMATIC S7-200. Siemens SIMATIC S7-200 18 страниц. Ethernet gateway for simatic mpi/ profibus driver
Также для Siemens SIMATIC S7-200: Руководство (30 страниц), Руководство (35 страниц), Руководство для водителя (28 страниц), Руководство (49 страниц), Руководство по системе (20 страниц)
Печатать страницу
Introduction
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure is described in the sections identified below:
1
System Configuration
This section lists the types of External
Devices and SIO that you can connect.
2
External Device Selection
Select the model (series) of the External
Device and its connection method.
3
Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
4
Setup Items
This section describes communication
setup items on the Display.
Set the Display's communication settings
in GP Pro-EX or in off-line mode.
Operation
GP-Pro EX Device/PLC Connection Manual
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver
"1 System Configuration" (page 3)
"2 External Device Selection" (page 6)
"3 Communication Settings" (page 7)
"4 Setup Items" (page 9)
2