Siemens Simatic S7-300 Начало работы - Страница 7

Просмотреть онлайн или скачать pdf Начало работы для Промышленное оборудование Siemens Simatic S7-300. Siemens Simatic S7-300 32 страницы. Automation systems, controlling a physical axis
Также для Siemens Simatic S7-300: Руководство пользователя (34 страниц), Руководство (21 страниц), Инструкция по эксплуатации (4 страниц), Инструкция по эксплуатации (5 страниц), Руководство (35 страниц), Начало работы (8 страниц), Начало работы (16 страниц), Описание приложения (24 страниц), Руководство (18 страниц), Руководство (32 страниц), Руководство по установке и оборудованию (20 страниц)

Preparation

2.1

The following requirements must be fulfilled:

● An S7-300 station, consisting of:

● A PG/PC with MPI interface and properly installed software packages and commissioning

● The PG/PC is connected to the CPU via the MPI/DP interface (transmission rate up to

● A SIMODRIVE 611U is interconnected with the CPU 317T-2 DP via DP(DRIVE) interface.

● The SIMODRIVE 611U modules:

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05

– Power supply (PS), e.g. 6ES7 307-1KA00-0AA0

– CPU 317T-2DP with inserted MMC (4 MB or more).

– Optional digital input module (DI) with bus connector, for example,

6ES7 321-1BH02-0AA0

– Optional digital output module (DO) with bus connector, for example,

6ES7 322-1BH01-0AA0

– Two optional front connectors for the digital modules

tools as listed below:

– STEP 7 as of V5.4 SP2

– S7 Technology as of V4.1

– SimoCom U (Version 10.03.03 or higher)

12 Mbps; default 187.5 kbps):

– PROFIBUS cable 6ES7901-4BD00-0XA0 (for transmission rates up to 12 Mbps)

– Controller module, for example, 6SN1 118-0NH00-0AAx

– Optional Motion Control module with PROFIBUS DP, 6SN1 114-0NB01-0AA0

– Also required for operating the SIMODRIVE 611U:

– A power unit, for example, 6SN1 12x-1Ax0x-0HAx

– A motor, for example, 1FT6 031-xAK7x-xExx (rated speed 6000 rpm), for example,

with one absolute value encoder