Siemens SINUMERIK 808D Руководство по эксплуатации - Страница 25

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 34 страницы. Connecting with v60 driver
Также для Siemens SINUMERIK 808D: Руководство по эксплуатации (46 страниц), Руководство по эксплуатации (48 страниц), Инструкции (2 страниц), Руководство по установке (48 страниц)

Minimum mounting clearance

To ensure adequate cooling, as a minimum, maintain the specified clearance between

drives, one drive and another device/inner panel of the cabinet.

Figure 3-6

Using the cable clamps supplied

If the CE marking requirements for cables are mandatory, the line supply cable and the

motor cable used must all be shielded cables. In this case, you can use the cable clamps as

a ground connection between the cable shield and a common ground point.

Clamps can also be helpful in better fixing cables (the unshielded motor cable and the line

supply cable) in place.

The illustration below shows you how to use the clamps to fix both cables and to make a

shield connection with the cable.

Mechanical Installation Manual

Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0

> 100 mm

> 25 mm

Drive mounting clearance (in mm)

> 25 mm

Mounting

3.2 Mounting the drive

> 100 mm