Siemens SIVACON Руководство по установке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по установке для Промышленное оборудование Siemens SIVACON. Siemens SIVACON 34 страницы. Distribution systems installation and maintenance instructions for power factor correction (pfc) capacitors
Печатать страницу
Safety notes
2.3 Ambient temperature
Note
Only qualified personnel are permitted to install, commission or service this device.
Wear the prescribed protective clothing. Observe the general equipment regulations and safety
regulations for working with high-voltage installations (e.g. DIN VDE, NFPA 70E as well as
national or international regulations).
The limits given in the technical data must not be exceeded even during startup or testing of the
device.
Before connecting the device, make sure that the line voltage matches the specifications on the
rating plate.
Before you start up the device, check that all connections are correct.
Before power is applied to the device for the first time, it must have been located in the operating
area for at least two hours in order to reach temperature balance and avoid humidity and
condensation.
Condensation on the device is not permissible during operation.
10
Installation and maintenance instructions for Power Factor Correction (PFC) capacitors
Installation Manual, 05/2022, L1V30884033A