Cisco WS-SUP720= - Supervisor Engine 720 Руководство по конфигурации

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Переключатель Cisco WS-SUP720= - Supervisor Engine 720. Cisco WS-SUP720= - Supervisor Engine 720 8 страниц. Chapter 4

Печатать страницу

Configuring a Supervisor Engine 720

This chapter describes how to configure a Supervisor Engine 720 in a Catalyst 6500 series switch. This

chapter contains these sections:

Using the Bootflash or Bootdisk on a Supervisor Engine 720, page 4-2

•

Using the Slots on a Supervisor Engine 720, page 4-2

•

Configuring Supervisor Engine 720 Ports, page 4-2

•

Configuring and Monitoring the Switch Fabric Functionality, page 4-2

•

For complete syntax and usage information for the commands used in this chapter, refer to the Cisco

Note

•

IOS Master Command List, Release 12.2SX at this URL:

http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html

•

With a 3-slot chassis, install the Supervisor Engine 720 in either slot 1 or 2.

With a 6-slot or a 9-slot chassis, install the Supervisor Engine 720 in either slot 5 or 6.

•

With a 13-slot chassis, install the Supervisor Engine 720 in either slot 7 or 8.

For additional information about Cisco Catalyst 6500 Series Switches (including configuration examples

Tip

and troubleshooting information), see the documents listed on this page:

http://www.cisco.com/en/US/products/hw/switches/ps708/tsd_products_support_series_home.html

OL-3999-08

Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide, Release 12.2SXF

C H A P T E R

4-1