Epson 1715C - PowerLite XGA LCD Projector Бюллетень поддержки продуктов - Страница 30

Просмотреть онлайн или скачать pdf Бюллетень поддержки продуктов для Проектор Epson 1715C - PowerLite XGA LCD Projector. Epson 1715C - PowerLite XGA LCD Projector 34 страницы. Remote control information
Также для Epson 1715C - PowerLite XGA LCD Projector: Руководство пользователя (42 страниц), Руководство по эксплуатации (36 страниц), Быстрая настройка (4 страниц), Руководство по эксплуатации (47 страниц), Руководство по установке (19 страниц), Руководство пользователя (1 страниц), Список деталей (1 страниц), Обновление документации (12 страниц), Функциональное руководство (5 страниц), Руководство по программному обеспечению (2 страниц), Бюллетень поддержки продуктов (25 страниц), Бюллетень поддержки продуктов (22 страниц), Бюллетень поддержки продуктов (28 страниц), Бюллетень поддержки продуктов (41 страниц), Бюллетень поддержки продуктов (28 страниц), Бюллетень поддержки продуктов (15 страниц), Бюллетень поддержки продуктов (22 страниц), Технические характеристики (2 страниц), Руководство по установке (8 страниц)

Печатать страницу
Epson 1715C - PowerLite XGA LCD Projector Бюллетень поддержки продуктов
S/N for projectors with the EasyMP V.1.10 firmware installed
Below are the starting serial numbers of units that ship with Firmware V.1.10. Pre-installed:
Model
Serial Number
NOTE: The EasyMP version of the PowerLite 1815p projectors is already V.1.10 for all
PowerLite 1815p projectors. Therefore the PowerLite 1815p projectors do not need the
V.1.10 firmware upgrade.

Download procedure

Preparing the computer

Download the firmware update file, epson12312.exe to the PC. This file is a self-extracting
archive and will decompress to C:\EPSON\epson12312_easymp_110. Copy the firmware
update files to the root directory of a USB Thumbdrive (flash memory).
Note: Make sure that the root directory of the flash memory only has the 2 firmware update
files on it; no other files or folders should exist on the USB memory device.

Preparing projector

Note: Do not unplug the power cord or remove the USB device before the upgrade is
complete. If the firmware update procedure is interrupted for any reason, before the
procedure is complete, it may render the projector unusable. If this occurs you will need
to contact Epson or take your projector to an authorized Epson Customer Care Center.
1. Power on the projector.
2. Make sure that the projector is set to "Network Off" by clicking, Menu ->Extended ->
Standby Mode. If the Standby Mode is set to "Network ON", set it to "Network Off", and
turn the projector off and on.
NOTE: If you attempt to run the firmware upgrade with the projector set to "Network
On", then the projector will be stuck in a loop and will continue to run the update.
In this case, remove the USB flash memory at the moment that the green light of
USB access indicator goes off.
3. Display the EasyMP main screen by pushing EasyMP button on the remote control.
4. Connect the USB flash memory to USB port Type A on the projector. A Black screen is
displayed. The projector enters download mode while making the 3 LED indicators
(Power, Lamp and Temp indicators) show solid orange. After a while, the USB access
indicator lights green and the update will start. When the update is complete, the green
light of USB access indicator goes off. NOTES: USB access indicator lights green a few
seconds after Power, Lamp and Temp LED's show solid orange. Don't remove the USB
flash memory during the updating (USB access indicator is lit.)
PowerLite 1715c
JHZG730647F
PowerLite 1705c
JJKG730217F
Page 2 of 5
PSB.2007.06.002
PowerLite 1815p
JV2F730001L