Epson 1730W - PowerLite WXGA LCD Projector Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Проектор Epson 1730W - PowerLite WXGA LCD Projector. Epson 1730W - PowerLite WXGA LCD Projector 11 страниц. Esc/vp21 command business projectors
Также для Epson 1730W - PowerLite WXGA LCD Projector: Список деталей (1 страниц), Руководство по быстрой настройке (2 страниц), Декларация о соответствии (4 страниц), Технические характеристики (2 страниц), Руководство пользователя (1 страниц), Руководство пользователя (25 страниц), Быстрая настройка (2 страниц)

Epson PowerLite 1720 / 1730W

note

If a button is pressed longer

than 30 seconds, the remote

control stops operating to

conserve power. When you

release the button, normal

operation resumes.

caution

When replacing batteries,

take the following

precautions:

Replace the batteries as

soon as they run out. If the

batteries leak, wipe away

hands, wash immediately.

Do not expose batteries to

Dispose of used batteries

according to local

regulations.

Remove the batteries if

you won't be using the

projector for a long period of

time.

Using the Remote Control

Follow these tips for using the remote control:

Point the remote control at the front of the projector or at the

screen.

Stand within 20 feet of the projector.

direct sunlight, or the projector may not respond properly.

Replacing the Batteries

Replace the batteries as described below:

1. Turn the remote control over.

2. Press the tab on the battery cover

to open it.

3. Install two AA batteries,

inserting the

and

as shown.

4. Close the cover, pressing it down

until it snaps into place.

INSTALLATION HANDBOOK

ends

–

Remote Control Information