Epson 1815p - PowerLite XGA LCD Projector Руководство пользователя - Страница 19

Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 страниц. Release of check tool for network projectors v1.00 for windows
Также для Epson 1815p - PowerLite XGA LCD Projector: Руководство пользователя (42 страниц), Руководство по эксплуатации (36 страниц), Руководство по эксплуатации (47 страниц), Быстрая настройка (2 страниц), Руководство пользователя (1 страниц), Функциональное руководство (5 страниц), Руководство по программному обеспечению (2 страниц), Декларация о соответствии (4 страниц), Список деталей (1 страниц), Бюллетень поддержки продуктов (45 страниц), Бюллетень поддержки продуктов (25 страниц), Бюллетень поддержки продуктов (22 страниц), Бюллетень поддержки продуктов (28 страниц), Бюллетень поддержки продуктов (41 страниц), Бюллетень поддержки продуктов (34 страниц), Бюллетень поддержки продуктов (28 страниц), Бюллетень поддержки продуктов (15 страниц), Бюллетень поддержки продуктов (22 страниц)

Печатать страницу

Epson 1815p - PowerLite XGA LCD Projector Руководство пользователя

Connecting in Advanced Connection Mode

1. Click

on the NS Connection screen.

Manual search

2. Enter the IP address or the projector name for the projector

you want to connect to, and click

The Projector is added to the EMP NS Connection screen.

If the search fails to find a projector with the specified IP

address, the searching icon turns into a question mark. If this

happens, run EasyMP on your projector (see page 10) to

check the projector's IP address, then repeat this step.

3. Click the projector you want to connect to and click the

button. If more than one projector is listed, you

Connect

can select additional projectors and connect to them at the

same time.

4. If you are prompted for a keyword, enter the four-digit

number displayed on the EasyMP Network screen and click

The computer's image is transmitted to the projector and

appears on the screen. See page 18 for details about using the

floating control bar on your computer desktop.

Solving Other Connection Problems

If you don't see your network adapter's IP address, allow a

minute for it to appear. If your access point or AirPort base

station uses DHCP (

Distribute IP addresses

for AirPort), sometimes it takes a minute for the server to pick

up the IP address.

setting is enabled

Once you've selected the IP address for your network adapter,

you won't see the Switch network dialog box when you start NS

Connection. If you want to change to a different network

adapter, click

Extension

box, then click

Switch LAN

If a projector is in use and is "locked," you won't be able to

select it. To lock the projector from connection by other users

while you are connected, click the

checkbox. De-select it to disable the lock and allow

connection

connection by other users.

Note: If you're using AirPort, the network name may be different

than the AirPort base station name. To check the network name,

start the AirPort Admin utility, select your base station, and click

. Then click

Configure

Show All Settings

appears on the AirPort tab.

Managing Projectors (PowerLite

1815p only)

The software included with your projector lets you monitor and

control your projectors from a remote computer.

❏ Use EMP Monitor (available for Windows only) to see your

projectors' status, switch image sources, and control basic

settings.

❏ Use the mail notification function to receive e-mail alerts

about possible problems.

You can also use NS Connection to register up to 16 projectors

as a group. This allows you to provide quick and easy access to

these projectors from other computers.

To use the software to manage your projectors, you must first

install EMP Monitor. If you plan to create projector groups,

also install EMP NS Connection. Then connect and configure

each projector you want to monitor. You can connect the

projector wirelessly in Access Point mode (see page 13) or over a

wired network as described here.

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your

projectors, whether connected wirelessly or over a wired

network. It lets you easily turn the projectors on or off (together

or individually), switch image sources, and check their status.

Before using EMP Monitor, make sure you've installed the

software (available for Windows only). The computer you're

using to monitor the projector should already be connected to

your network.

Opening and Closing EMP Monitor

To start EMP Monitor, click

Programs > EPSON Projector > EMP Monitor

3/08

PowerLite 1810p/1815p

on the EMP NS Connection dialog

on the extension dialog box.

Disable interrupt

. The network name

Start > Programs

All

PowerLite 1810p/1815p