Epson PowerLite 7900p Projector
3. Press the P
button again. The P power light flashes
Power
orange for about 30 seconds as the projector cools down.
After the projector has cooled, the orange light stays on and
the exhaust fan shuts off.
Caution: To avoid damaging the projector or lamp, never
unplug the power cord when the P power light is green or
flashing orange.
If you want to turn the projector on again, wait until the
orange light stops flashing. Then press the P
button.
4. If you extended the adjustable front foot, press up on the
blue foot release lever and lower the projector to retract it.
5. Replace the lens cap and unplug the power cord.
6. If you're using the remote control, turn it off to conserve
battery power.
7. Disconnect any equipment plugged into the projector.
Using the Remote Control
The remote control lets
you access your
projector's features from
anywhere in the room
(up to 30 feet away).
If the projector does not respond to the remote control, make
sure batteries are installed and the switch on its side is turned
on. Also make sure the projector ID and remote control ID
match. (See "Controlling Multiple Projectors" on page 12.)
10
Epson PowerLite 7900p Projector
-
The projector also might not respond if:
The batteries are weak
You're standing at too great a distance from the projector
A certain type of fluorescent light is present
A strong light source (such as direct sunlight) shines into
the infrared receiver
Other equipment emitting infrared energy is present
Power
This table summarizes the remote control functions.
Button
E-Zoom
Page
Power
PinP
Color Mode
A/V Mute
Resize
Freeze
Turn on
remote control
Effect
Enter
ESC
Menu
Help
Source
Preview
Preset
Auto
Wall Shot
Volume
Num
ID
9/04
Function
Zooms in on a portion of your image.
Advances to the next or previous image in a
slideshow.
Turns the projector on or off.
Displays a picture-in-picture image.
Adjusts the vividness of the image color. You can
select from several settings, and save a different
setting for each computer or video source.
Turns off audio and video, displaying the black,
blue, or user logo background. Press again to turn
audio and video back on.
Adjusts how an image fits into the display area.
Halts action. Press again to resume action.
Illuminates the buttons on the remote control.
Navigates menus or controls the mouse pointer
when the projector is connected to a computer
with the mouse cable.
Selects a drawing or pointer tool.
Selects a highlighted menu option, or functions as
the left mouse button when the remote control is
used in place of your computer's mouse.
Displays the previous menu when using the menu
system. Functions as the right mouse button when
the remote control is used in place of your
computer's mouse.
Displays the on-screen menu system.
Displays the on-screen help system.
Switches to the equipment connected to the
corresponding port: DVI, Comp, BNC, S-Video, or
Video. (The EasyMP button does not work on this
projector.)
Previews connected sources (see page 5).
Selects a preset group of options for displaying
computer images.
Optimizes a computer image.
Adjusts the colors for projecting on a wall,
blackboard, or other surface.
Increases or decreases the sound.
Turns on the numeric keypad. (Press this key until
it lights.)
Sets the remote control ID. (See "Setting the
Remote Control ID" on page 12.)
Печатать страницу