Siemens CD634GA 0 Series Руководство пользователя и инструкция по установке - Страница 34
Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Печь Siemens CD634GA 0 Series. Siemens CD634GA 0 Series 36 страниц.
Также для Siemens CD634GA 0 Series: Руководство по эксплуатации (32 страниц)
en Installation instructions
17.4 Installation underneath a hob
If the appliance is installed under a hob, the following
minimum dimensions must be adhered to (including
substructure, if applicable).
Hob type
Induction hob
Full-surface induction hob
Gas hob
Electric hob
17.5 Installation in a tall unit
Observe the installation dimensions and the installation
instructions when installing in a tall unit.
¡ To ventilate the appliance, the intermediate floors
must have a ventilation cut-out.
¡ If the tall unit has another back panel in addition to
the element back panels, this must be removed.
¡ Only fit the appliance up to a height which allows
accessories to be easily removed.
34
a raised in mm
42
52
32
32
The minimum worktop thickness
required minimum clearance
a flush in mm
43
53
43
35
17.6 Corner installation
Observe the installation dimensions and the installation
instructions when installing in a corner.
¡ To ensure that the appliance door can be opened,
you must take the minimum dimensions into consid-
eration when installing in a corner. The dimension
is dependent on the thickness of the unit front and
the handle.
17.7 Electrical connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
¡ The appliance corresponds to protection class I and
must only be operated with a protective earth con-
nection.
¡ The fuse protection must correspond to the power
rating specified on the appliance's rating plate and
to local regulations.
¡ The appliance must be disconnected from the
power supply whenever installation work is being
carried out.
¡ The appliance must only be connected using the
power cable provided.
a is based on the
.
b in mm
5
5
5
2