Siemens CM724G1 2 Series Руководство пользователя и инструкция по установке - Страница 16
Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Печь Siemens CM724G1 2 Series. Siemens CM724G1 2 Series 44 страницы.
Печатать страницу
en Microwave
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
Do not switch on the microwave unless there is food
▶
inside. The only exception to this rule is when per-
forming a short cookware test.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
Start the operation.
3.
Check the cookware several times:
4.
If the cookware remains cold or warm to the
‒
touch, it is suitable for microwave use.
If the cookware becomes hot or sparks are cre-
‒
ated, stop the cookware test. The cookware is
not microwave-safe.
10.2 Setting options with the microwave
You can use the microwave on its own or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
Added microwave
Adding the microwave to an operating mode reduces
the cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 13
– 2D hot air
– Top/bottom heating
– Circulated air grilling
– Full-surface grill
– Centre-area grill
¡ → "Dishes", Page 17
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
10.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
16
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 10
¡ → "Cookware and accessories with microwave",
Page 15
Press "Microwave".
1.
Or select the microwave directly using the
‒
ton.
Press the required microwave output setting.
2.
Press "Cooking time".
3.
A cooking time must always be set to operate the
microwave.
To change the preset cooking time, press the relev-
4.
ant time value, e.g. minute display "min" or second
display "s".
a The selected value is marked in blue.
Set the cooking time using
5.
the adjustment bar.
If required, use
to reset the setting value.
Press "Apply".
6.
Press
to start the operation.
7.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→ "Microwave output settings", Page 10
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
8.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
If condensation has formed in the cooking compart-
9.
ment, dry the cooking compartment.
→ "Drying function", Page 24
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 19
Changing the microwave output setting
You can change the microwave output at any time.
1.
Press the microwave output setting.
Change the microwave output setting.
2.
Press "Apply".
3.
Changing the cooking time
You can change the cooking time at any time.
Press the cooking time.
1.
Change the cooking time using
2.
via the adjustment bar.
Press "Apply".
3.
10.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 10
¡ → "Cookware and accessories with microwave",
Page 15
but-
or
, or directly via
to switch the ap-
or
, or directly