Siemens HB213AB 0 Series Руководство пользователя и инструкция по установке - Страница 19

Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Печь Siemens HB213AB 0 Series. Siemens HB213AB 0 Series 28 страниц.

Siemens HB213AB 0 Series Руководство пользователя и инструкция по установке
Fault
The appliance does
not switch off fully at
the end of a cooking
time.
The time flashes in
the display.
lights up in the
display and no set-
tings can be made
on the appliance.
A message with  ap-
pears in the display,
e.g.
-
.
14.2 Replacing the oven light bulb
If the light in the cooking compartment fails, change
the oven light bulb.
Note: Heat-resistant, 25-watt, 230 V halogen bulbs are
available from the after-sales service or specialist retail-
ers. Only use these bulbs. Hold the new halogen bulbs
only with a clean, dry towel. This increases the service
life of the bulb.
WARNING ‒ Risk of burns!
The appliance and its parts that can be touched be-
come hot during use.
Caution should be exercised here in order to avoid
touching heating elements.
Young children under 8 years of age must be kept
away from the appliance.
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
Before replacing the bulb, ensure that the appliance
is switched off in order to prevent a potential electric
shock.
Also unplug the appliance from the mains or switch
off the circuit breaker in the fuse box.
WARNING ‒ Risk of injury!
The glass cover may already have broken due to ex-
ternal influences or it may break due to excessive pres-
sure when being installed or removed.
Exercise caution when installing or removing the
glass cover.
Use gloves or a tea towel.
Cause and troubleshooting
At the end of a cooking time, the appliance stops heating up. The oven light and cooling fan
do not switch off. For types of heating with recirculation, the fan continues to run in the back
wall of the cooking compartment.
Turn the function selector to the off position.
a The appliance is switched off.
a The oven light and the fan in the back wall are switched off.
a The cooling fan switches off automatically as soon as the appliance has cooled down.
There has been a power cut.
Reset the time.
→ "Setting the time on the clock", Page 11
Childproof lock is activated.
Use the
⁠   button to deactivate the childproof lock.
→ "Childproof lock", Page 11
Electronics fault
Press the
⁠   button.
1.
If required, reset the time.
a If the fault was a one-off, the error message disappears.
If the error message appears again, call the after-sales service. Quote the exact error
2.
message and the E no. of your appliance.
→ "Customer Service", Page 20
Requirements
¡ The appliance is disconnected from the power sup-
ply.
¡ The cooking compartment has cooled down.
¡ You must have a new halogen lamp to replace the
old one.
Place a tea towel in the cooking compartment to
1.
prevent damage.
Turn the glass cover anti-clockwise to remove it  ⁠ .
2.
Pull out the halogen bulb without turning it  ⁠ .
3.
Insert the new halogen bulb and press it firmly into
4.
the socket.
Make sure that the pins are positioned correctly.
Depending on the appliance model, the glass cover
5.
may have a sealing ring. Attach the sealing ring.
Screw in the glass cover.
6.
Remove the tea towel from the cooking compart-
7.
ment.
Connect the appliance to the power supply.
8.
Troubleshooting en
19