Siemens IQ500 Инструкция по установке и использованию - Страница 15

Просмотреть онлайн или скачать pdf Инструкция по установке и использованию для Стиральная машина Siemens IQ500. Siemens IQ500 16 страниц.
Также для Siemens IQ500: Руководство пользователя (27 страниц), Руководство по установке (20 страниц), Руководство по установке (19 страниц)

Removing the safety caps

If the safety caps must be removed, use a flat screwdriver.

Connecting the pipes

Note: If using an aluminium pipe, smooth the connection area

beforehand.

Exhaust-air pipe Ø 150 mm (recommended size)

Attach the exhaust-air pipe directly to the air-pipe connector

and seal.

Exhaust-air pipe Ø 120 mm

Attach the reducing connector directly to the air-pipe

connector.

Attach the exhaust air pipe to the reducing connector.

Seal both joints appropriately.

Attaching the flue duct

Risk of injury!

From sharp edges during installation. Always wear protective

gloves while installing the appliance.

Separate the flue ducts.

To do this, remove the adhesive tape.

Remove the protective foil from both flue ducts.

Push one flue duct into the other.

Notes

To prevent scratches, lay paper over the edges of the lower

■

flue duct to protect the surface.

Slots of the inner flue duct point downwards.

■

Place flue ducts on the appliance.

Push the inner flue duct upwards and attach it to the fixing

brackets on the left and right.

Press the flue duct downwards until it engages.

Screw the flue duct to the sides of the fixing bracket using

two screws.