Siemens WG44A1XVZA Руководство пользователя и инструкция по установке - Страница 38
Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Стиральная машина Siemens WG44A1XVZA. Siemens WG44A1XVZA 48 страниц.
en Troubleshooting
Fault
"E:36 / -10"
flashes.
lights up.
flashes.
All other error codes.
38
Cause and troubleshooting
Ensure that the pump cap is screwed in all the way
▶
into the appliance. The handle on the pump cap
must be in a vertical position.
→ "Cleaning the drain pump", Page 36
The water pressure is low.
No remedial action possible.
The filters in the water inflow are blocked.
Clean the filters in the water inflow.
▶
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
The automatic voltage control system detects an un-
authorised voltage under-usage.
No remedial action possible.
▶
Note: If the power supply is stable, the programme
continues to run as normal.
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 32
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 25
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Reload/Pause to start the programme.
4.
Door is not closed.
Close the door.
1.
Press Start/Reload/Pause to start the programme.
2.
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 46