Digital ID View VAX Series Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для DVR Digital ID View VAX Series. Digital ID View VAX Series 12 страниц. Pc linux embedded dvr
Печатать страницуUnpack the DVR then connect the cameras, mouse, network cable (if used) and monitor.
Connect the power cord.
The DVR will normally power up when the power cord is connected, if not, power
the unit on with the switch above the power cord – it will take approximately 1½ to
2 minutes for the DVR to complete the full boot cycle.
When fully booted, you will obtain the live view screen seen below and the DVR will be
recording. Most functions are disabled until you login.
If you move the mouse cursor over the Digital ID View logo
, a window will appear
showing the product information which includes DVR firmware version, release date,
CPU, and clock speed.
When the cursor is positioned over the HD symbol
in the upper right corner, it will
provide the hard drive size and usage (the DVR will overwrite the oldest data – circular
recording).
And, with the cursor over the computer network symbol
, it will show the current IP
address (DCHP - obtain an IP address automatically - is on by default and if the network
cable is plugged in and connected to a switch or router, the DVR will acquire an address).
This address can then be used to access the DVR remotely (see the section on remote
access).
1