Siemens dishwasher Руководство по эксплуатации - Страница 6

Печатать страницу

Siemens dishwasher Руководство по эксплуатации

Filling with salt

Note

If the degree of hardness of your

tap water corresponds with value

on the appliance (see chapter

"Adjusting the softening

system"), it is not necessary to fill

the dispenser with salt, as salt is

not used during operation of the

dishwasher. Salt is required for

values

During the washing process the salt is

automatically washed into the softener

and dissolves the calcification.

The calcareous solution is pumped out of

the dishwasher. The softening system is

then reset to standby.

This regeneration sequence does not

function until the salt has dissolved in the

water.

When the appliance is switched on,

low salt is indicated by "Refill salt". (This

display is no longer indicated as soon as

you have set the value for the softening

system to

Open the screw cap on the dispenser

Before switching on the appliance for

the first time, pour approx. 1 litre of

water into the salt dispenser.

Use the enclosed salt filler.

Add salt until the salt dispenser is full

(max. 1.5 kg). When you add salt, water

is displaced and runs away. Salt should

always be refilled immediately before

washing. This ensures that the

overflowing salt solution is immediately

diluted and washed out. Then remove

salt residue from the filling area and

screw down the dispenser without

jamming the threaded plug.

As soon as the salt concentration is

adequately high, the "Refill salt" display

goes out.

If you do not want to wait for the display

to go out before washing, acknowledge

that salt has been added by pressing the

"Acknowledge" button

If you do not want to add any salt at the

moment, you can skip the "Refill salt"

display by pressing the "Acknowledge"

button

Warning!

Do not pour detergent into the

container for special salt. This

would destroy the water

softener.