Siemens IQ 100 Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Посудомоечная машина Siemens IQ 100. Siemens IQ 100 12 страниц.
Также для Siemens IQ 100: Инструкция по эксплуатации и монтажу (43 страниц), Руководство (8 страниц), Инструкция по установке и использованию (16 страниц), Краткое справочное руководство (2 страниц)
Печатать страницу
3Trouble shooting
Malfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Fault table
Problem
Possible cause
The appliance
The plug is not
does not work
plugged into the
mains
Power cut
The fuse is faulty Check in the fuse box to make
The lighting does
The LED lights
not work.
are defective.
--------
Solution
Connect the appliance to the
power supply
Check whether other kitchen
appliances are working
sure that the fuse for the appli-
ance is in working order
You can read about this in the
section entitled "Replacing the
LED lights".
Replacing the LED lights
:
Warning – Risk of electric shock!
When changing the bulbs, the bulb socket contacts are
live. Before changing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in the
fuse box.
:
Warning – Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than
100 seconds.
Important! Only use bulbs of the same type and
wattage.
Lift the bulb cover slightly and move it towards the
1.
outside of the appliance.
Unscrew the bulb and replace it with a bulb of the
2.
same type.
Fit the bulb cover.
3.
Plug in the mains plug and switch the fuse back on.
4.
Trouble shooting
en
9