Siemens BE Series Инструкция по установке и использованию - Страница 12

Просмотреть онлайн или скачать pdf Инструкция по установке и использованию для Варочная панель Siemens BE Series. Siemens BE Series 20 страниц.

Печатать страницу

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Turning the hob on and off

The hob is turned on and off using the main switch.

To turn on: Press the

symbol. A beep sounds. The indicator

located next to the main switch and the

hotplates light up. The hob is ready for use.

To turn off: press the

symbol until the indicators go out. All

hotplates are turned off. The residual heat indicator will remain

lit until the hotplates have cooled down sufficiently.

Notes

The hob switches off automatically when all the hotplates are

■

switched off for more than 20 seconds.

The settings are memorised for 4 seconds after the hob has

■

been turned off. If the hotplate is switched back on within this

time then the previous settings will be applied.

Set the hotplate

Select the required power level with the + and - symbols.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Selecting the hotplate and power level

The hob must be switched on.

Select the hotplate with the

Melting

Chocolate, chocolate coating

Butter, honey, gelatin

Heating and keeping warm

Stew (e.g., lentils)

Milk**

Sausages heated in water**

Defrosting and heating

Frozen spinach

Frozen goulash

* Uncovered cooking

** Uncovered

*** Turn frequently

‹

indicators of the

symbol.

Within the next 10 seconds press the + or - symbol. The

basic setting appears:

+ symbol = power level 9

- symbol = power level 4

The power level has been set.

Changing the power level

Select the hotplate and press the + or - symbol until the

required power level comes on.

To switch off the hotplate

Select the hotplate and then press the + or - symbol until

symbol appears.

The hotplate turns off and the residual heat indicator appears.

Notes

If no pan has been placed on the hotplate, the selected

■

power level flashes. After a certain time has elapsed, the

hotplate switches off.

If a pan has been placed on the hotplate before switching on

■

the hob, it will be detected within 20 seconds of pressing the

main switch and the hotplate will be selected automatically.

Once detected, select the power level within the next

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one will be

detected when switching it on.

Cooking guidelines table

The table below contains some examples.

Use power level 9 to begin cooking.

When heating purées, creams and thick sauces, stir frequently.

Power level

1-1.

1-2

1.-2.

3-4

‹