Siemens BE Series Инструкция по установке и использованию - Страница 16

Просмотреть онлайн или скачать pdf Инструкция по установке и использованию для Варочная панель Siemens BE Series. Siemens BE Series 20 страниц.

Печатать страницу

Accessing the basic settings

The hob should be turned off.

Turn on the hob.

Within the next 10 seconds, press the

4 seconds.

In the display, the settings

as the default setting.

Press the

symbol several times until the required function

‚

appears.

Care and cleaning

The advice and warnings contained in this section aim to guide

you in cleaning and maintaining the hob, so that it is kept in the

best possible condition

Hob

Cleaning

Clean the hob after each use. This prevents food remains left

on the surface from burning. Wait until the hob is cool enough

before attempting to clean it.

Only use cleaning products specifically designed for hobs.

Follow the instructions provided on the packaging.

Do not use:

Undiluted washing-up liquid

■

Dishwasher detergent

■

Abrasive products

■

Corrosive products such as oven sprays or stain removers

■

Sponges that may scratch

■

High-pressure or steam cleaners

■

Fixing malfunctions

Malfunctions are usually due to small details. Before calling the

Technical Assistance Service you should bear in mind the

following advice and warnings.

Indicator

Malfunction

none

The electric power supply has been cut off. Use other electrical appliances to check whether there has been a

The appliance has not been correctly con-

nected following the connection diagram.

Electronic system malfunction.

* If the warning persists call the Technical Assistance Service.

Do not rest hot pans on the control panel.

symbol for

‚

and

light up alternately with

™

‚

Then select the required setting using the + and - symbols.

Press the symbol

The settings will have been correctly saved.

Quit

To leave the basic settings, turn off the hob at the main switch.

‹

The best way to remove stubborn stains is to use a glass

scraper. Follow the manufacturer's instructions.

Suitable glass scrapers can be obtained through the Technical

Assistance Service or from our online shop.

Hob frame

In order to avoid damage to the hob frame, follow the

indications below:

Use only slightly soapy hot water

■

Do not use sharp or abrasive products

■

Do not use a glass scraper

■

Solution

power cut.

Check that the appliance has been connected correctly according

to the connection diagram.

If none of the above checks resolve the malfunction, contact the

Technical Assistance Service.

‚

again for more than 4 seconds.