Siemens EC6A5IB90A Инструкции пользователя - Страница 9

Просмотреть онлайн или скачать pdf Инструкции пользователя для Варочная панель Siemens EC6A5IB90A. Siemens EC6A5IB90A 20 страниц.

Adjusting the gas valves

Turn the control knobs to the lowest setting.

Remove the control knobs from the gas valves. A

flexible rubber sealing ring will be visible. Push down

with the tip of a screwdriver on the gas valve's

setting screw.

Never remove the sealing ring. Sealing rings

prevent liquids and dirt from finding their way into

the appliance and impairing its ability to function

properly.

If necessary, use a Torx screwdriver to adjust the

bypass screws:

A: For ULPG the bypass screws must be tightened

properly.

B: For Natural Gas the bypass screws must finish

flush with the fitting.

Make sure that the flame does not go out and that

there are no flashbacks when you turn the control

knob between the highest and lowest setting.

Never remove the gas tap axle. In the event of damage,

the gas valve must be completely replaced.

Getting to know your appliance

*Getting to know your

appliance

B urner locations

G e t t i n g t o k n o w y o u r a p p l i a n c e

Pan supports

Control knobs

Economy burner with an output of up to 1 kW

Standard-output burner with an output of up to 1.75 kW

High-output burner with an output of up to 3 kW

Wok burner with an output of up to 4 kW

Dual-wok burner with an output of up to 5 kW