Siemens EH....FE.. Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Siemens EH....FE... Siemens EH....FE.. 20 страниц.

Печатать страницу

The hotplates

Hotplate

Single hotplate

Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching them when this

indicator is lit.

Although the hob is switched off, the indicator

remain on for as long as the hotplate is hot.

If the pan is removed before the hotplate is turned off, the

indicator

•

and the selected power level will appear

alternately.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Turning the hob on and off

The hob is turned on and off using the main switch.

To turn on: Press the

symbol. A beep sounds. The indicator

located next to the main switch and the

hotplates light up. The hob is ready for use.

To turn off: press the

symbol until the indicators go out. All

hotplates are turned off. The residual heat indicator will remain

lit until the hotplates have cooled down sufficiently.

Notes

The hob switches off automatically when all the hotplates are

■

switched off for more than 20 seconds.

The settings are memorised for 4 seconds after the hob has

■

been turned off. If the hotplate is switched back on within this

time then the previous settings will be applied.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Selecting the hotplate and the power level

The hob must be switched on.

Select the hotplate with the

The

symbol lights up in the display.

Always use cookware of a suitable size.

will

•

indicators of the

‹

symbol.

Within the next 10 seconds, slide a finger over the

programming zone until the desired power level lights up.

The power level has been set.

Changing the power level

Select the hotplate and set the desired power level in the

programming zone.

Switch off the hotplate

Select the hotplate and set it to

The hotplate turns off and the residual heat indicator appears.

Notes

If no pan has been placed on the hotplate, the selected

■

power level flashes. After a certain time has elapsed, the

hotplate switches off.

If a pan has been placed on the hotplate before switching on

■

the hob, it will be detected within 20 seconds of pressing the

main switch and the hotplate will be selected automatically.

Once detected, select the power level within the next

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one will be

detected when switching it on.

in the programming panel.

‹