Siemens EH6 MD2 Series Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Siemens EH6 MD2 Series. Siemens EH6 MD2 Series 20 страниц.
Также для Siemens EH6 MD2 Series: Руководство по эксплуатации (16 страниц)
Печатать страницу
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
Press the
symbol several times until the
0
1.
up.
lights up in the time program function display.
‹‹
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
#
symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
‹
Deactivated.*
‚
Activated.
Sound signals
™ƒ
Confirmation beep and error signal deactivated.
‹
Only confirmation beep deactivated.
‚
ƒ
All signals activated.*
Automatic timer
™†
‹
Switched off.*
-
Automatic shut-off time.
‚
ŠŠ
Duration of the time program function warning signal
™‡
10 seconds*.
‚
ƒ
30 seconds.
1 minute.
„
*Factory settings
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
the indicators turn off.
Pressing the
beep.
indicator lights
W
Changing or cancelling the time
Press the
up. Change the cooking time in the programming panel, or set
to
‹‹
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
and
selected power level (from 1 to 10 hours).
"
‰
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
is shown, and the
indicator comes on. After 10 seconds
W
symbol turns off the indicators and stops the
0
symbol several times until the
0
.
indicator lights
W
13