Digital Juice MATTE BOX PRO Руководство по началу работы - Страница 2

Просмотреть онлайн или скачать pdf Руководство по началу работы для Аксессуары для фотоаппаратов Digital Juice MATTE BOX PRO. Digital Juice MATTE BOX PRO 3 страницы.

Печатать страницу

Getting Started Guide

Unpacking & Assembling the DJ Matte Box PRO

Accessing the Camera Lens While Using the Matte Box PRO:

To gain access to your lens without removing the matte box, lift the spring-

loaded blue knob on the top of the matte box swing-away hinge (28)

swing the matte box out and away from your lens (29). When the matte box

is fully open, release the knob. This will lock the matte box open and keep it

from swinging (30). To close, lift the knob and swing the matte box toward

the lens again.

(continued)

4. Remove the package of donuts from

the rear of the matte box (15).

5. Using the black thumbscrews,

attach the matte box to the swing

away rail adaptor (16). These

thumbscrews also adjust the height

of the matte box from the rails (17).

Using Your DJ Matte Box PRO

Your DJ Matte Box PRO kit has several functions and unique adjustments that you

can change depending on your specific shooting situation.

Making Adjustments to Your Matte Box PRO Unit:

Flags can be attached or removed using the blue thumbscrews located on

the flag hinges on the top, bottom and sides of each matte box. Each flag

has a tab with screw slots

flag's tab under the screw heads, then tighten the thumbscrews down (20).

To adjust the flags, ensure that the flag hinge is loose by turning the black

hinge tension knob counterclockwise (21). Once the hinge is loose, adjust

the flag to the desired position and

re-tighten the hinge tension knob to

lock the flag in place (22).

and

To move the matte box closer or further away from your lens, first loosen

the blue thumbscrew handle located on the bottom of the matte box's

15mm rail adaptor (23), then slide the matte box to the desired position

on the rails and tighten the thumbscrew. For minor adjustments, you can

loosen the other blue thumbscrew handle, located on the side of the 15mm

rail adaptor (near the swing away hinge) and slide the matte box backward

or forward on the short 15mm rails attached to the hinge (24).

(18 &

19). Loosen the thumbscrews, slip the

(continued on next page >)