ActronAir MOC-045CS Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Воздухораспределители ActronAir MOC-045CS. ActronAir MOC-045CS 20 страниц. One-way cassette

Печатать страницу

Owner's Manual

[ Caution ]

To use the unit normally, please follow the "Operation" section in this manual. Otherwise,

[ Caution ]

CAUTION

the internal protection may be triggered, the unit may begin to drip, or the unit's cooling and

• To use the unit normally, please follow the "Operation" section in this manual. Otherwise, the

heating effects may be impacted.

To use the unit normally, please follow the "Operation" section in this manual. Otherwise,

internal protection may be triggered, the unit may begin to drip, or the unit's cooling and heating

the internal protection may be triggered, the unit may begin to drip, or the unit's cooling and

The room temperature should be set properly, especially when there are elderly, children, or

effects may be impacted.

heating effects may be impacted.

patients in the room.

• The room temperature should be set properly, especially when there are elderly, children, or

The room temperature should be set properly, especially when there are elderly, children, or

Lightning or the starting and stopping of large electrical equipment in nearby factories may

patients in the room.

cause misoperation of the air conditioner. Please turn off the main power switch for a few

• Lightning or the starting and stopping of large electrical equipment in nearby factories may cause

seconds, and then restart the air conditioner.

Lightning or the starting and stopping of large electrical equipment in nearby factories may

misoperation of the air conditioner. Please turn off the main power switch for a few seconds, and

cause misoperation of the air conditioner. Please turn off the main power switch for a few

To avoid accidental resetting of the thermal circuit breaker, the air conditioner cannot be

then restart the air conditioner.

seconds, and then restart the air conditioner.

• To avoid accidental resetting of the thermal circuit breaker, the air conditioner cannot be powered

turned on and off by a common component timer.

To avoid accidental resetting of the thermal circuit breaker, the air conditioner cannot be

by an external switching device such as a timer or connected to a circuit that is turned on and off by

Check whether the air filter is installed properly. Confirm that the inlet and outlet ports of the

a common component timer.

turned on and off by a common component timer.

IDU/ODU are not blocked.

• Check whether the air filter is installed properly. Confirm that the inlet and outlet ports of the

Check whether the air filter is installed properly. Confirm that the inlet and outlet ports of the

If the air conditioner will not be used for a long time, please clean the air filter before you

Indoor Unit/Outdoor Unit are not blocked.

IDU/ODU are not blocked.

start the air conditioner. Otherwise, dust and mold on the filter could contaminate the air

or produce an unpleasant odor. For more details, please refer to the section "Cleaning and

If the air conditioner will not be used for a long time, please clean the air filter before you

• If the air conditioner will not be used for a long time, please clean the air filter before you start the

Optimum Operation

Maintenance".

start the air conditioner. Otherwise, dust and mold on the filter could contaminate the air

air conditioner. Otherwise, dust and mold on the filter could contaminate the air or produce an

or produce an unpleasant odor. For more details, please refer to the section "Cleaning and

unpleasant odor. For more details, please refer to the section "Cleaning and Maintenance".

Maintenance".

According to the characteristics of cold air sinking and hot air rising, in order to improve the effect of refrigeration and

heating, it is suggested that the air guide bar and the ceiling should be at an angle of 30 °~65 ° for air outlet during

02.02. Optimum Operation

refrigeration and heating operation.

According to the characteristics of cold air sinking and hot air rising, in order to improve the effect of refrigeration

and heating, it is suggested that the air guide bar and the ceiling should be at an angle of 30 °~65 ° for air outlet during

refrigeration and heating operation.

CAUTION

Long-term air outlet at an angle of 30 ° may cause condensation on the surface of the air guide bar. It is recommended to

[ Caution ]

have the angle of the air guide bar between 30 ° and 65 °.

Long-term air outlet at an angle of 30 ° may cause condensation on the surface of the air guide bar. It is recommended

to turn on the anti-condensation function through the remote controller to alleviate this situation.

Operating Range

Owner's Manual ECOFLEX MINI VRF R-32 SERIES - 1 WAY CASSETTE

Doc. No.9590-4028-02 Ver. 1 230819

ECOFLEX MINI VRF R-32 SERIES

USE