Digital Loggers Ethernet Power Controller II Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Digital Loggers Ethernet Power Controller II. Digital Loggers Ethernet Power Controller II 8 страниц.

Digital Loggers Ethernet Power Controller II Руководство пользователя
Times to Attempt Reboot
If you have an unreliable target device, limit the number of times it
will be rebooted by entering that value here.
entering 5 will reboot your server up to 5 times before giving up.
Device Reboot Delay
After rebooting a device with a cold-boot power-off, a waiting
period should occur before the IP address is re-checked by
AutoPing. This delay allows the device to reboot. Windows and
Linux servers can force automatic file system checks which may
take several minutes to complete. Enter a safe value To allow for
this, enter a time delay in the Device Reboot Delay period. For
example, a reasonable value for a typical Windows server might
be 10 minutes (600 seconds). Entering 600 would cause the
power controller to start checking the server for normal operation
10 minutes after reboot.
)XWXUH 6HULDO 3RUW 6XSSRUW
Two serial ports are provided for remote access. This feature will be
added in a free future firmware ugprade.
9ROWDJH &XUUHQW 0RQLWRULQJ
The Outlet control page displays voltage and current on the A and B
busses separately. Each of the four web meters acts independently.
The design accuracy of the meters is +/- 2%.
Ethernet Power Controller II
12
For example,
www.digital-loggers.com
7HFKQLFDO 6XSSRUW
To save time and effort, please read this manual completely before
calling for tech support. You may FAX questions to (408) 541-8459
or email:
330-5599 and please have the following ready so we can better serve
you:
A copy of your invoice.
The firmware version level installed in the power switch. This
information can be found on the lower left corner of the outlet
control page.
A description of the Ethernet devices connected to your unit, for
example, a 10/100 PC and crossover cable.
For phone support, dial (408)
Ethernet Power Controller II
13